How To Separate Solutions Mixtures Emulsions Chemical Tests Chemistry FuseSchool

solution is mixture of two or more substances in the same phase this is formed when solute dissolves in solvent solution can also be formed when two or more missible liquids are mixed together when each ethanol and water are mixed together solution is formed now how would we separate these solutions to separate dissolved salt from water we would simply evaporate as much water as possible leaving behind white salt crystals the separation technique is known as evaporation to separate ethanol from water we must take into account the fact that these substances have very different boiling points water boils at 100° whereas ethanol boils at 78° this mixture can be separated by simple distillation the lower boiling point component in our case ethanol will evaporate first the ethanol vapor condenses as it passes through the condenser and the distilled ethanol can then be collected in the receiving flask the above mixtures are homogeneous mixtures this means that the components of the mixture are in the same phase or the composition of the mixture is uniform throughout now we will look at separating heterogeneous mixtures where the components in the mixture are not in the same phase or the composition of the mixture is uneven if we have mixture of sulfur and iron filings we can easily separate this mixture with magnet the magnet will remove all of the iron filings leaving behind the yellow Sulfur powder we know that salt is completely soluble in water but sand is not how would you separate mixture of salt and sand easily keeping in mind the solubility of salt and water pause think and continue when you have an answer the salt and sand mixture can be added to water salt will dissolve but sand can not the resulting heterogeneous mixture can be filtered through funnel lined with Filter paper and washed with water to remove as much salt as possible the substance that remains on the filter paper is known as the residue and the substance collected in the flask is called the filtrate for our case sand is the residue and the salt water is the filtrate the salt can be obtained using evaporation and the sand left to dry the same method is used to separate suspension which is mixture of an insoluble solid in liquid such as for example small bits of chalk in water to em missible liquids such as oil and water can be separated using separatory funnel this is an apparatus with stopcock at the bottom releasing the stopcock allows the contents to flow out and closing it stops the flow to summarize there are many different techniques to separate mixtures all depending on whether the mixture is homogeneous or heterogeneous